When using the automatic edge sawing machine, the requirements for accuracy are very high, which is in the commissioning work after the installation is completed.
The edge sawing machine occupies an important position in sheet metal processing. In order to ensure the normal operation of the equipment and better processing of the sheet metal, the edge sawing machine needs to be lubricated with lubricating oil and checked.
For the commissioning of the automatic edge sawing machine, the first two contents are the horizontal commissioning and the straight line commissioning. Before cutting the board horizontally, it is necessary to ensure that the angle is connected to the saw blade at 90 degrees, and the two ends of the board must reach the saw blade at the same time. In order to complete the exact cutting work. And good quality sawing machine. It is necessary to ensure the quality of the saw edge of the product, and the error should be controlled within 1mm. Even if the error is within 1mm, it must be ensured that the error occurs under the same conditions. In a larger situation.
In the work of the automatic edge sawing machine, the force should be even, so that the board is in a straight line to ensure the quality of the edge cutting of the board. After a period of use, you should pay attention to fixing the saw head screw and tightening the V-belt. After a month and a half of use, Also add oil to the bearing to maintain the service life of the bearing.
When lubricating the sawing machine, the first thing to consider is the quality of the lubricating oil. A better lubricating oil not only lasts for a long time, but also plays a good role in lubricating and protecting. If the quality is not good, it may It will affect the product, so you must pay more attention. When adding lubricating oil, it should not just be supplemented, but should also be replaced regularly, otherwise the lubricating oil will be oxidized, resulting in a reduction in the quality of use, and the use effect cannot be guaranteed.
Post time: Apr-15-2022