Pushing Type Sawing Machine (with suction cups to input the board)
1.Product parameter
The product is 9800mm long, 1500mm wide and maximum-value high. Specific parts refer to the drawings.
2.Product function
Pushing Type Automatic Sawing Machine
Production efficiency
(1) The machine produces the triple ply boards (3mm thick). It produces 20 sheets per time, 40 sheets per minute, 2400 sheets per hour and about 10000 sheets within 10 hours if the time of raw materials being taken into the machine is considered.
(2) The machine produces 18mm-thick plates. It produces 4 sheets per time, 8 sheets per minute, 300 sheets per hour and about 3000 sheets within ten hours if the time of raw materials being taken into the machine is considered.
(3) Only one operating machine worker is needed during the production.
3.Product features
The pushing type sawing machine ensures stable sawing effect. The transmission track of the pushing table is equipped with 40 straight lines. It is recommended to use the pushing type sawing machine to meet the high-standard sawing requirements. The diagonal error can be controlled within 1 mm and the straight line within 0.5 mm.
The more reasonable power transmission effect as well as the better sawing effect.
The frame is design more reasonably. The machine weight has greater advantages over others in the industry. It is of the stable quality and easy to operate after fine machining all parts.
The product aims to saw the plates, such as chipboard, density board, Malacca, triple ply board, wood board, multi-layer board, fire-retardant board, melamine substrate, building template, Compete board, bamboo board, flame retardant board, LVL.
|
Name |
Brand Model（Technical parameter, QTY） |
Unit (MM) |
|
|
Automatic Sawing Machine Parameter |
Type |
RL-JG-3 Automatic sawing machine [with Gantry weighting suction cups] |
|
|
External specification |
Longitudinal sawing：10600mm1200mm Cross sawing：5600*3400mm |
|
|
|
Sawing motor |
Geshi Holding：longitudinal sawing 11KW Cross sawing 11KW |
|
|
|
Waling motor |
China Jiarui：2.2KW/4 poles/415V/4.4A/2 sets/retarded machine I=16.22/M1-0° |
|
|
|
Lifter motor |
Jiangsu Huaning ：3KW/4 poles/415V/6A/2 sets |
|
|
|
Lifter |
Upper board lifter: 1 set Board hoist: 1 set Ground roller output motor of 3 KW weighting |
|
|
|
Linear track |
Guangdong Dongguan：Longitudinal: 8200mm*2pcs, cross: 3800mm*2 pcs/40 carbon steel belt radial screw holes |
|
|
|
Linear rail bearings |
4 pcs/40 inside diameter open self-centering bearing (automatic refueling sucker: 3400mm*2, 30 carbon steel belt radial screw holes） |
|
|
|
Sawing bearing |
SKF（oil bearings included） |
|
|
|
frequency converter |
Nanjing Oulu：4KW/415V/9.0A/Output 0.5~600HZ/2sets |
|
|
|
PLC |
Xinjie: XC2-48R-E/1 set/electric relay of 28-point input and 20-point output |
|
|
|
Touch panel |
Xinjie: TG765/1 set/7-inch real-color panel with resolution of 800*480 |
|
|
|
Air-break switch |
Zhengtai: NM10-100/100A/1 set |
|
|
|
Isolated transformer |
Zhengtai: BK-150/150VA/1 set/input: 380V output: 220V |
|
|
|
a.c. contactor |
Zhengtai: CJX2-4011/220V/40A/4 sets |
|
|
|
Electric relay |
Zhengtai: JZX-22F/2Z/220V/11pcs |
Easily-worn parts provided： sealing ring (cylinder) : 1 set, 1 proximity switch, 2 photoelectric switches, 2 solenoid valves, 8 slider bearings |
|
|
Current transformer |
Huatong: LMZJ1-0.5/1 set |
||
|
Ammeter |
Huatong: 6L2-100A1 set |
||
|
Voltmeter |
Huatong: 6L2-450V/1 set |
||
|
Proximity switch |
OMRUN: LE2B-M18KN16-WP-C1/DC24V/10 pcs |
||
|
Plate feeder |
Suction cup transmission: 3400mm*2 pcs, 30 carbon steel belt radial screw holes |
|
|
|
|
|
Sawing board dimension: 1220-1240mm, 2440-2460 |
|
|
|
|
Sawing blade 305/3.2/25.4/100gear teeth |
|
|
Walking motor |
China Jiarui：1.5KW/4 pole/415V/3.7A/1 set/retarded machine I=16.22/M1-0° |
Dust outlet: 8 pcs/120 |
|
|
Frequency converter |
Nanjing Oulu: 1.5KW/380V/3.7A/Output 0.5~600HZ/1 set |
Total weight: 9T |
|
|
PLC |
Xinjie: XC-16YR-E extended module 1 set |
||
