head_banner

Technical Data

  • Analysis of operating skills of edge sawing machine

    Analysis of operating skills of edge sawing machine

    In the process of wood processing, a lot of mechanical equipment will be used to improve the efficiency. It has to be admitted that the sawing machine can really guarantee the accuratequality and fast speed. It does not require too many personnel to complete the processing task.However, the personnel who operate the edge sawing machine need to be very professional. At least they can work after knowing the operating principle of the machine. If the new automatic edge sawing machine needs to be...
  • Correct use of automatic sawing machine

    Correct use of automatic sawing machine

    With the continuous progress of society, many industrial chains have been driven, and the field of scientific research and technology has also made a qualitative leap. Only by mastering the correct use method can the maximum performance of the product be exerted. Next, the I will explain the correct use of the automatic sawing machine for you. Lubricants are used on many parts of the automatic edge sawing machine. This is because many parts are exposed to the air for a long time and with the ...
  • Structural characteristics of drum type sawing machine

    Structural characteristics of drum type sawing machine

    1. Drum sawing machine is composed of a frame, a power mechanism and a sawing machine, wherein the sawing mechanism is fixedly connected to the frame, and the power mechanism is installed on the frame and connected with the sawing mechanism; The edge sawing mechanism is composed of a wall panel support, a conveying system and a saw edge device; the wall panel support is fixedly installed on the frame, and rectangular holes are symmetrically opened on the front and rear wall panels of the wall...
  • How to judge whether the saw blade needs to be sharpened

    How to judge whether the saw blade needs to be sharpened

    How to judge whether the saw blade needs to be sharpened? After sawing a certain number of plates, the saw blade needs to be replaced and sharpened so that it can be used again next time. So from what direction should the saw blade be judged when it needs to be sharpened? 1. There are burrs on the edge of the board Under normal circumstances, the burrs on the half edge of the sawing will be less or easy to remove. If you find that there are too many burrs or edge chipping, and it is difficul...
  • Four factors that affect the working efficiency of the lifting platform

    Four factors that affect the working efficiency of the lifting platform

    The lifting platform has a very important application in many occasions, and the role is very important, but some people report that the lifting platform is inefficient when working, so what factors affect the working efficiency of the lifting platform. Today, I will share with you the factors that affect the efficiency of the lifting platform. 1) Select the hydraulic press reasonably. The pressure of the lifting platform adjusting the pressure valve is also an important aspect to reduce powe...
  • Reasons affecting the chip of the face veneer

    Reasons affecting the chip of the face veneer

    There are two situations that affect the chip, the main saw blade (large saw blade chip); the slot saw (bottom saw chip) External conditions: 1) Listen to the sound. The machine will resonate during long-term operation. Everyone knows that the car will resonate, and the saw blade will vibrate or shake during operation. If the vibration with the machine is too significant, the contact area with the ground can be adjusted; It can be adjusted contract surface if the saw blade shakes significantl...